|
Version
|
MCU
|
Revision items
|
|
ver 11.2
May/2024
|
TI
C2000
|
- TMS320F28P55xS series support
(source file easy28x_bitfield_v11.2.c is required)
Bug Fix : flash programming error for
bank 4 of TMS320F28P65xDH
|
|
ST STM32
|
-
STM32U0 series support (source file easyStm32LL_v11.2.c is required)
- support for
STM32U5A5xI,STM32U5F7xJ, STM32U5F9xJ, STM32U5G7xJ and STM32U5G9xJ
- support for STM32WB09xE, STM32WBA54x[E,G], STM32WBA55x[E,G] and STM32WL33x[8,B,C]
|
|
Renesas RA
|
-
RA2A2, RA8T1 MCU series support
Bug Fix : no new project created for RA8D1 MCU
|
|
Renesas RX
|
-
RX23E-B series support
|
|
ver 11.1
Jan/2024
|
Common
|
- Writing to variable is not allowed if
the variable is located in the flash
Bug Fix : malfunction
of plot window when 'Total plot period' is more than 71582 minutes
|
|
ST STM32
|
- STM32U535, STM32U545, STM32U595,
STM32U599, STM32U5A5 and STM32U5A9 series are supported
|
|
Renesas RA
|
- RA2E3, RA4E2,
RA4T1, RA6E2, RA6T3, RA8D1 , RA8M1 MCU series support (together
with easyRA_v11.1.c and easyRA_v11.1.h)
Bug
Fix :
flash programming not available for RA6M5 with flash area 1.5MB or higher
|
|
Renesas RX
|
- RX26T support
|
|
NXP LPC1xxx
|
- support flash
programming of LPC1500 series
- supportLPC1300, LPC1700 and LPC1800 (with onchip flash) series
Bug Fix : wrong address recognition of 'array of union' variable
|
|
TI AM2x
|
- changes related to RAM booting and flash
programming (app image file changeable, SBL baudrate changeable, no SBL image
file provided by easyDSP)
Bug Fix : no
"MulticoreImageGen.exe" file exits in the easyDSP/Util folder. Bug
from v10.8 to v11.
|
|
ver 11
Sep/2023
|
TI C2000
|
- Support for
TMS320F28P65x (source file v11 is required)
- F2837xD,
F2838xD : change of sharable memory management for CPU2 ram booting (source
file v11 is required)
Bug Fix : In case TMS320F2838xD CPU1 uses
DriverLib libray : CM fails to flash boot if CPU2 is used (source file
'easy28x_driverlib_v11.c' is required)
|
|
TI MSPM0
|
- Support for MSPM0
series
|
|
ver 10.9
Jun/2023
|
ST STM32
|
- S upport for
STM32H5 and STM32WBA series with new source file 'easyStm32LL v10.9.c'
Bug Fix : verifying flash failed for STM32H7, STM32L0,
STM32L1, STM32L5 and STM32U5 in some case due to wrong flash programming
|
|
NXP LPC1500
|
- supports NXP
1500 series (no support flash programming)
|
|
ver 10.8
Apr/2023
|
Common
|
- Multi dimensional array is supported upto 10 dimension. In
the previous version, only up to 4 dimension.
- Array window : when copying the selected cells to clipboard, easyDSP first
fills the empty cells if any.
|
|
TI C2000
|
- Support for TMS320F280015x with new source files
(easy28x_bitfield_v10.8.c or easy28x_driverlib_v10.8.c)
Bug Fix : for
TMS320F280013x, flash programming doesn't work out in some case
|
|
ST STM32
|
- supports STM32C0 MCU series with new source file
'easyStm32LL v10.8.c'
|
|
Renesas RX
|
- supports RX MCU series
|
|
ver 10.7
Jan/2023
|
Common
|
- Watch window :
variable row can be moved up and down
- Watch/Memory/Tree/Array windows : optionally highlight the changed cell
with yellow background color
|
|
TI AM2x
|
- Support for AM263x
|
|
TI TM4C
|
- Support for
TM4C123x and TM4C129x
|
|
ver 10.6
Nov/2022
|
TI C2000
|
- Support for TMS320F280013x
with new source files (easy28x_bitfield_v10.6.c or
easy28x_driverlib_v10.6.c)
- No need to run easyDSP as administrator
Bug Fix : Symbol information is not extracted
in multi core MCU from CPU2 (bug for version 10.5.1 only)
|
|
ver 10.5.1
Nov/2022
|
TI C2000
|
Bug
Fix : Flash
operation is not working with error message "The variables in flash API
wrapper are not fully recognized!" (bug for version 10.3 and higher)
|
|
ver 10.5
Nov/2022
|
Common
|
- No more support
for old style memory window
- Memory Window : In case &var format is used as address input, if
it is changed with code modification, the address of the window is
automatically changed after MCU booting.
Bug Fix :
- Command Window : incomplete auto variable seeking for struc/union/bitfield
variables
|
|
ST STM32
|
- Source file is
updated to easyStm32LL_v10.5.c. With this,
1.
STM32G0x : In the RAM booting and Flash Programmer dialog, entering
bootloader is improved
2. STM32H7 dual core (STM32H745x, STM32H747x, STM32H755x
and STM32H757x) : Data cache usable
3. If FIFO is available to USART, you can use it to speed up
easyDSP communication
|
|
Toshiba TXZ3
|
- supports Toshiba
TXZ3 MCU series
|
|
ver 10.4
May/2022
|
Common
|
Bug
Fix :
- When using DWARF4 or DWARF5 debugging information format with ARM MCU, the
address and bit location of bitfield variable is not correct in certain
cases.
|
|
TI C2000
|
Bug Fix :
- For 2838x, the flash operation is not working unless all the CPU1, CPU2 and
CM are used in the project. This is the bug of v10.3 and v10.3.1 only.
|
|
Toshiba TX
|
- supports Toshiba
TX MCU series
|
|
ver 10.3.1
Apr/2022
|
TI C2000
|
Bug
Fix :
- For 2838x, the easyDSP project is not created/open unless all the CPU1,
CPU2 and CM are used in the project. This is the bug of v10.3 only.
|
|
ver 10.3
Apr/2022
|
Common
|
- Watch window : address column includes bit information in
case ofbitfield variable (for ex, 0x1234@bit1-2)
- Chart window : 1 dimmentional array variable only. count input by
user is blocked. It's fixed to array count.
- Tree window : mouse right click toggles the display mode ( decimal =>
hex-decimal => binary => decimal....)
- Memory window : versatile address input format and comment are enabled
- Faster symbol information processing
- Driver file updated to CDM212364_Setup.exe
- Display mode (hex or dec or bin) for bitfield variable is changeable
Bug Fix :
- Member of anonymous structure/union variable is not properly displayed
- Anonymous bitfield member is not properly displayed
- Bitfield member with its size more than 4 bytes is not properly displayed
|
|
TI C2000
|
-
When using multiple easyDSP projects for multi core MCU such as 2837xD and
2838xS/D, If the output file of CPU2 or CM is reloaded as requested by
CPU1, below message box is displayed.
- 32bit Windows is
not supported for COFF debugging model
- Register window
: no more support
- More stable operation of 'Flash API speed [bps]' function in flash dialog
(introduced from v10.1)
Bug Fix :
- For 2837xD and 2838xS/D, the error message "Can't open *.bin
file!" could show up when the output file of CPU2 or CM is updated after
entering to flash dialog.
- For 2837xD and 2838xS/D, the old out file of CPU2 and CM could be used for
RAM booting or flash writing if there is no easyDSP project is open for CPU2
and CM.
- For 2837xD with coff debugging model, CPU2 program is not updated in the
flash dialog
|
|
ST STM32
|
-
easyDSP uses the hex file IDE created when ram booing and flash programming.
please make IDE create hex file in every compiling time. Note that the other
option available in the previous easyDSP which easyDSP itself makes hex file
is not available now !
Bug Fix :Flash is programmed with the latest user program
regardless of your choice if you use the hex file IDE created
|
|
Infineon PSoC4
|
Bug
Fix : Flash is programmed with
the latest user program regardless of your choice
|
|
Infineon XMC4
|
Bug
Fix : Flash is programmed with
the latest user program regardless of your choice
|
|
Renesas RA
|
First release for
Renesas RA MCU series
|
|
Infineon XMC1
|
First release for
Infineon XMC1 MCU series (only for monitoring. flash programming not
supported)
|
|
ver 10.2
Jan/2022
|
TI C2000
|
Bug
Fix : F2837xS : flash dialog box not open (bug
of v10.1)
|
|
Infineon PSoC4
|
First release for
Infineon PSoC4 MCU series (RAM booting not supported)
|
|
Infineon XMC4
|
First release for
Infineon XMC4 MCU series (RAM booting not supported)
|
|
ver
10.1
Nov/2021
|
Common
|
-
New style memory window (check futher )
Bug Fix :
- Character value (ex, 'A') can be assigned to non character type variable
- In array window, character value (ex, 'A') can't be assigned to character
type variable
- floating value can be assgined to pointer variable to float or double or
long double
|
|
TI C2000
|
-
F28003x : newly supported
(must use the latest easyDSP source file version 10.1, CCSv11 and
compiler version is 21.6.0.LTS)
- F2802x, F2802x0, F2803x, F2805x, F2806x, F2807x, F2837xS, F2837xD, F28004x,
F28002x, F2838xD and F2838xS : flash operation speed up (max. twice)
 Please
choose bps to speed up. Note some bps could be not working.
- F2807x/F2837xS/F2837xD : supporting internal clock source
- F2802x Rev.0 : No more support
- F2838xS/D CM : 'Enables fast verifying' checkbox in RAM booting dialog
is now disabled.
- Multi core F2837xD and F2838xS/D MCU : When RAM booting or flash
programing in easyDSP project for CPU1, the communication is paused in the
easyDSP project for CPU2 and CM if the projects are open in the
same PC.
- new easyDSP DriverLib source file (easy28x_driverlib_v10.1.c) : supports
F28003x, new pin mux naming of C2000Ware_4_00_00_00 and 32bit address support
for Gen3 MCU
- new easyDSP DriverLib source file (easy28x_cm_driverlib_v10.1.c) : enabled
access to EtherCAT RAM area and ECC, address alignement and range check to
prevent Hard Fault
- new easyDSP BitField source file (easy28x_bitfield_v10.1.c) : supports
F28003x and 32bit address support for Gen3 MCU
Bug Fix :
- struct/union variable recognition error (bug in v10)
- system error happens when accessing TI OTP memory area in Memory window
- F2838xS/D CM : failed in verifying RAM booting in some cases
|
|
ST STM32
|
-
No more support for HAL based easyDSP source file (due to more resource
burden than LL based one)
- LL based easyDSP source file improvement (address alignment check and
others) : please use easyStm32LL_v10.1.c
- STM32WB10xC and WB15xC : new support
- STM32U5 series : new support
Bug Fix :
- used page of flash is not identified for some MCUs which has
128bytes page size
|
|
ver 10
May/2021 |
Common |
Bugs Fixed : Invalid struct or union variable is registered in
tree window |
|
TI C2000 |
- Improved auto bauding process for F2837xS, F2837xD and F2807x
-
supports class type for C++
- Improvements in
flash dialog (except C2834x)
1.
check if all used flash sectors are selected to be erased before
"Erase>Program..." button is clicked
2. button for all flash operation
(erase to reset)
3. update
output file when operations to flash is requested (such as program,
verify, select used or select not used), not when flash dialog is
open.
Bugs Fixed :
- F2837xD and F2838xS/D: Even though updated out file
is declined by user in the flashROM dialog, updated out file is programmed
for CPU2 and CM
- F2837xD and F2838xS/D: If *.out
file is updated after entering to flashROM dialog or RAM booting dialog,
updated out file is not programmed if easyDSP project for CPU2 or CM
is not activated.
|
|
ST STM32 |
- first release for ST STM32
series (dedicated easyDSP pod required)
- supporting F0, F1, F2, F3, F4, F7, G0, G4, H7, L0,
L1, L4, L5, WB and WL series |
|
ver 9.5
Dec/2020 |
TI C2000 |
- No more legacy bitfield source file from
easyDSP installation package
- Timing of /BOOT pin
of easyDSP pod is changed
- For more stable CPU2
RAM booting of F2837xD/F2838xD, easyDSP source file
(easy28x_BitField_v9.5.c/
easy28x_DriverLib_v9.5.c) is upgraded.
Please check the help file.
Note
- For RAM booting of F2837xD/F2838xD CPU2
: please use "easy28x_driverlib_v9.5.c" and
"easy28x_bitfield_v9.5.c" source files
Bug Fix :
-
wrong symbol display at 0x0 address in Memory window (v9.3 and v9.4
only)
- 2807x, 2837xS, 2837xD CPU1 : incorrect reserved RAM
region check for boot-rom (v9.4 only) |
|
ver 9.4
Oct/2020 |
TI C2000 |
- Chart window improvement : Speed up for chart
window update (helpful for big size array) by enabling 'Enable fast
reading' option. More window update frequency. Paused when communication
is failed a lot.
- Speed up for verifying RAM
booting. Pls enable 'Enable fast verifying' option.
- Better autobauding of flashAPI wrapper in the
flashROM dialog of 28002x, 2838x.
- speed up by
skipping verifying of flashAPI wrapper booting in flashROM dialog
(note : for 28002x, 2837x and 2838x, this
function was applied from the previous version. It is applied now to all
MCUs)
- one time reading of 4 and 8 bytes variable
in the bitfield based source files (easy28_bitfield_v9.4.c and
easy28_gen2_bitfield_v9.4.c)
- Change in the
title of menu and its shortcut (Serial Booting, ALT+S -> Ram
Booting, ALT+R)
Note
- 2838x CM : please use
"easy2838x_cm_driverlib_v9.4.c"
Bug Fix :
-
Chart window : in some cases, it is not updated properly after out
file update
- Tree window : not valid variable
with * operator in variable list (bug of v9.3 only)
- 2838x : When using 2838x CPU1 and CM, updated
CM program is not reflected automatically to CM project after CM program
is booted in CPU1 project
- 2807x, 2837xS, 2837xD
CPU1, 2837xD CPU2, 2838x CPU2 : incorrect reserved RAM region check for
boot-rom
- 2838x CM : failed address is
not correct when verifying is failed
- 2838x CM :
flash rom writing error when section start address is 64bit
aligned |
|
ver 9.3
Jun/2020 |
TI C2000 |
- checking before RAM booting if user code
overlaps with memory region for boot rom and easyDSP
- New bitfield source now available for TMS320F280x,
F281x and F28044
- bitfield source now available
for TMS320F2838xS/D for CPU1 and CPU2
- value at
address operator (*) is supported for pointer variable
Bug Fix :
-
Error in flashrom operation due to skipping booting with flashAPI wrapper
- time interval not working in watch window
- F2838x CM section alignment check error
in flashrom dialog |
|
ver 9.2
Apr/2020 |
TI C2000 |
- TMS320F2838x is supported with DriverLib only
- TMS320F28002x is supported
- set Rx input pin to pullup type to increase
noise immunity
- New bitfield source now available
for TMS320F2802x, F2802x0, F2803x, F2805x and F2806x
Bug Fix :
-
In some cases, bin file is not created
- In
some cases, dwarf version 4 is not properly supported
- Windows are not updated after 'Reload *.out' menu
execution
- treat pointer to struct/uniton
variable as struct/unition variable in Tree window
- 28004x flash rom : 'select all' button not working
in flash dialog window
- 28004x flash rom
: not working if clock source is not external
20MHz |
|
ver 9.1
Mar/2020
|
TI C2000 |
- DriverLib based easyDSP source files (28004x,
2807x, 2837xS and 2837xD) and example main.c
- new
bitfield based easyDSP source files (28004x, 2807x, 2837xS, 2837xD,
2823x, 2833x and 2834x) and example main.c or main_gen2.c
- output file reloading menu
- supports ELF-based Embeded Application Binary
Interface (EABI)
- improved flashAPI wrapper
booting in flash rom dialog of 2837xD, 2837xS, 2807x and 28004x
Bug Fix :
-
pointer to struct variable is registered in Tree window
- v9.03 only : error in flashAPI wrapper booting in
flash rom dialog of 2837xS, 2807x and 28004x |
|
ver 9.03
Jan/2020
|
TI C2000 |
Bug Fix (Bugs only for ver 9.x) :
- auto bauding failure in case of 2837xS,
2837xD, 2807x and 28004x
- project is not open if
project folder and folder of *.out file is different |
|
ver 9.02
Dec/2019
|
TI C2000 |
- When creating new project, user need to set
debugging model (either coff or dwarf) of compiler in its project
setting. When opening existing project which was created before easyDSP
verion 9.02, coff is selected by default. |
|
ver 9.01
Dec/2019
|
TI C2000 |
Bug Fix :
- For some cases, easyDSP can't tell compiler
option correctly. |
|
ver 9
Dec/2019
|
TI C2000 |
- supports the latest TI compiler version greater
than ver.15
- supports "--symdebug:dwarf" compiler
option
- No more support for
"--symdebug:coff"
Note that coming update could be not available for
"--symdebug:coff"
- when using "--symdebug:dwarf" compiler option,
display variable type with its typedef name (ex,
Uint32) |
|
ver 8.8
Nov/2019 |
TI C2000 |
- Faster serial booting
- More
stable 28004x serial booting
-
Bluetooth not supported anymore
- "ramfuncs" or
".TI.ramfunc" usage in help file
- possible to use
internal clock source for 28004x
Bug Fix :
- some bit field variables are read
as 0 if the bit is located most significant word in
32bit variable.
- scientific expression of zero can't be input (ex,
0e-3)
- flashrom operation is not successful if section
size is more than 0xFFFF in case of 2837xD, 2837xS and
2807x
- dimension display error |
|
ver 8.7
Feb/2019 |
TI C2000 |
- support TMS320F28004x (except CLA2.0 due to low
compiler version)
- support TMS320F28076
-
support TMS320F28378D/TMS320F28378S
- Driver file
updated (CDM21228_Setup.exe)
- Serial booting
sequence optimization for less auto bauding failure
(but it takes ~1sec in addtion in serial
booting process)
- Plot/Record window can display upto 8
graphs
- Improvement of display in Plot window when
'Show all'
Bug Fix :
- bug fixed in 2834x SCI ISR code in
"easy2834x_sci_v8.52.c"
Please use "easy2834x_sci_v8.7.c", not
use "easy2834x_sci_v8.52.c"
- "Flash api wrapper file is missing !" message in
F2802x flash writing
- execute outside selection when
running selection in command window
- Flashrom
dialog box of TMS320C2834x series disappears
- Time-out
failure when erasing many flashrom sectors
|
|
ver 8.6
Mar/2017 |
TI C2000 |
- Driver file is updated (CDM21224_Setup.exe)
- supports TMS320F28333
- New
SCI ISR source code using SCI FIFO ( easy2833x_sci_FIFO_v8.6.c ) is
now provided for TMS320F2833x to improve communication
stability even under very limited time resource
- reading performance improved for longdouble type
variable
- supports the section size of out file
over than 0xFFFF
Bug Fix :
- Sampling interval of plot window is not
saved if it is less than 50msec |
|
ver 8.53
Sep/2016 |
TI C2000 |
-Driver file updated (CDM21218_Setup.exe)
Bug Fix :
- some specific variable was not recognized as
'structure' variable in Tree window
- Flashrom operation was not working at all with
2837xD if the lengths of out file name of CPU1 and CPU2 are
different |
|
ver 8.52
Jun/2016 |
TI C2000 |
- SPI flash access algorithm of C2834x series is
improved if you use 'easy2834x_sci_v8.52.c' file.
Bug Fixd :
- bank1 sector flash of F2837xS can't be
accessed |
|
ver 8.51
Apr/2016 |
TI C2000 |
- Data saving in mili seconds unit in
plot/record window
- More stable serial booting
operation for TMS320F2807x, TMS320F2837xD and TMS320F2837xS
Bug Fix :
- Flashrom operation of piccolo
F28051 |
|
ver 8.5
Mar/2016 |
TI C2000 |
- Stable serial booting operation for TMS320F2807x,
TMS320F2837xD and TMS320F2837xS
- supports delfino
TMS320F28379S, TMS320F28379D
- supports Windows 10
(driver file : CDM v2.12.10 WHQL Certified.exe )
-
New contents in help file regarding "Interrupt Nesting"
- New contents in help file regarding "How to use
another port for easyDSP"
- supports only CPU1
operation of TMS320F2837xD
- No more support for
flashrom operation with bluetooth
Bug Fix :
- Serial booting dialog box sometimes stops or
disappears during operation
- Flashrom dialog box sometimes stops or disappears
during operation
- TMS320F2837xS/D f lashrom operation didn't
work |
|
ver 8.4
Mar/2015 |
common |
- Updated driver files ( CDM v2.12.00 WHQL
Certified.exe )
Bug Fix :
- easyDSP sometimes stops when opening new easyDSP
project
- Q format of variables are not saved
|
|
TI C2000 |
- supports piccolo TMS320F2807x (x=4 and 5) series
- supports delfino TMS320F2837xD (x=4, 5, 6 and 7)
series
- supports delfino TMS320F2837xS (x=4, 5, 6 and 7)
series
Not supported anymore :
- No support for TMS320F28024 and
TMS320F28025 |
|
ver 8.3
Mar/2014 |
common |
- supports Windows 8.1 (driver installation file = CDM
v2.08.30 WHQL Certified for Windows 8.1.exe).
-
supports Windows 8 (driver installation file = CDM20828_Setup.exe).
-
Chart window is added and replaces previous MemGraph window. Plus, it
provides additional functionalities.
- Plot window has additional
functionalities such as tooltip, symbol, visibility, zoom in/out, absolute
time display and total time display.
- Memory window doesn't allow
the user to write the memory which is not writeable (ex. flash)
-
float type variable is displayed with better expression.
-
Same user format (ex, Q-format, hex display, dimension) is applied to all
members of array variable.
- No sorting of variables when opening watch
window.
Bug Fix :
-
When progress bar is active in either serial booting or flashrom dialog,
the other parts are not displayed.
- Wrong hex value display with 8 byte
long double variable.
- When getting into edit mode in array window by
enter-key input, the value is written to the variable.
- 'Project
> Save As' menu is not working properly.
- easyDSP
gets stuck when saving command to text file in command window.
Not
supported anymore :
- "Tools > DOS Prompt" is removed.
-
MemGraph window is replaced with Chart window. |
|
TI C2000 |
- supports piccolo TMS320F2802x0 (x=2,3,6,7) series
-
flashAPI wrappers are now built-in (no more selection of external wrapper
file by the user).
- #progma added in both 'easy28x_sci_v*.*.c' and
'RingBuffer.c' for fast and stable operation of easyDSP ISR. Please refer
to the help file. |
|
ver 8.2
Feb/2013 |
common |
- Value is displayed in different mode when right
mouse clicking (decimal > hexadecimal > binary)
Bug Fix :
-
Windows are not updated accordingly after serial booting with out file
reloaded
(Bug in ver 8.0 and 8.1)
-
Windows are not updated accordingly after flash writing with out file
reloaded
(Bug in ver 8.0 and 8.1)
-
other minor bug fixes
Not supported anymore :
-
display char variable with printable character (Project setting >
Miscellaneous) |
|
TI C2000 |
- Help file includes how to use easyDSP wireless
(bluetooth)
- supports TMS320F28020, TMS320F28021 flash
writing
- If the CPU is TMS320C2834x and program entry
point is 'c_int00', then easyDSP recommends to switch the entry point from
'c_int00' to 'code_start'. |
|
ver 8.1
Jan/2013 |
common |
- hexa-decimal number should have prefix
'0x'. |
|
TI C2000 |
- TMS320F2805x piccolo supported
- AT25DF161(16Mbit SPI serial flash) supported
as an external SPI flash for TMS320C2834x |
|
ver 8.0
Apr/2012 |
common |
- Q-format and dimension format can be applied to each
single member of structure, union and array variable
- can
display enum variable (it was displayed as 'enum' in previous version)
- If
reading is failed, the value is displayed as '?'
-
strict range checking for array
(In previous
version, iarray[100] can be accessed with the variable defined as int
iarray[8]. It is now not allowed.)
- only one-dimensional array is
allowed to be used in MemGraph window
- WHQL certified driver
- 64bit Windows supported (Windows 7 x64, Windows
Vista x64, Windows XP x64, Windows Server 2003 x64, Windows Server 2008
x64)
- no longer support Windows 98/Me ! |
|
Bug Fix :
- value display of 'bit field' variable defined as
integer |
|
TI C2000 |
- TMS320F2806x piccolo supported
- M25P20, M25P40, M25P80, M25P16, M25P32 are
supported as an external SPI flash for TMS320C2834x
- echo
checking during serial booting
(serial booting stops immediately
after echo checking fails)
- supports flash writing of
TMS320F2802x piccolo Rev.A
- easyDSP with I2C communication is not supported
!
- TMS320LF240xA is not supported
! |
|
Bug Fix :
- value display of 'long double' variable in
the Plot/MemGraph windows
- Failed verifying operation of serial booting
in case that the size of section exceeds 0x8000
- 4 byte
display for 'far pointer' variable (in previous version, only 2 bytes
displayed) |
|
TI 3x |
- not supported anymore
A special goodbye to 3x after 12 years support
!!! |
|
TI 6x |
- not supported anymore ! |
|
ver 7.4
May/2010 |
common |
- help file
in english
- driver for Windows
7 |
|
TI C2000 |
- supports SPI-type external flash for Delfino series
TMS320C2834x
-ATMEL SPI-type flash : AT25DF021, AT25DF041, AT26DF081,
AT25DF321
-use easy2834x_sci_v7.4.c in case of SCI
communication
-use easy2834x_i2c_v7.4.c and
RingBuff2_2834x.c in case of I2C communication
- supports TMS320F28030, TMS320F28031
- supports TMS320F28020, TMS320F28021
- Bug fix :
Bug that
user can't select I2C communication with Delfino series
Bug during serial booting of delfino
series |
|
TI 6x |
- Bug fix in flashrom routine (please use
flashrom_v7.4.c) |
|
ver 7.3
Oct/2009 |
TI C2000 |
-
new easyDSP pod for I2C communication
(Especially for XINTF usage with TMS320F2833x,
2823x, 2834x)
note : FlashAPI wrapper
program should be version 7.3 ( suffix with _v7.3) for I2C
- piccolo series TMS320F2802x(x=2,3,4,5,6,7)
- piccolo series TMS320F2803x(x=2,3,4,5)
- Delfino series TMS320C2834x
(x=1,2,3,4,5,6) |
|
common |
- RESET pin active low duration is changed to
250msec@reset menu, 500msec@serial
booting |
|
ver 7.2
May/2009 |
TI C2000 |
- Bug fix for serial booting for 281x/280x (bug only
for v7.1) |
|
TI 3x |
- Use 'VC33' instead of 'C33' in project setting
- 'Use fast communication speed (only for USB pod)'
function added in AT29LV040 flashrom dialog |
|
ver 7.1
Jan/2009 |
common |
- Remove 'DSP'> 'ReLoad COFF' menu
- Remove MMI function of Command
window |
|
TI C2000 |
- long double variable access ( if you use
easy28xx_sci_v7.1.c)
- Speed up at verifying of
SCI serial booting ( if you use easy28xx_sci_v7.1.c)
- Automatic selection for serial booting file
- 283x/282x TMS-version flashrom (new flashAPI
wrapper program is needed)
- 28044 flashrom
|
|
TI 6x |
- DSP program revision to 'easy6x_uart_v7.1.c' (
previous one will be no longer supported)
- speed
up when verifying flash rom (in case of easy6x_uart_v7.1.c)
- don't use easy6x_uart_var.c in V7.0 any more
- automatic rom booting file
selection |
|
TI 3x |
- automatic serial booting file selection
- 'skip checking' function added in flashrom
AT29LV040 programming |
|
ver 7.0
Jul/2008 |
common |
- Firmware revision
(All
previous pod need to be firmware upgraded in order to use Ver7.0 and
onwards)
- Windows Vista support
(driver installation necessary)
- Time and Date
Stamp
- remove 'Tools > Linking with File' menu
(Use save function of MemGraph as a substitute) |
|
TI C2000 |
- TMS320F283x/TMS320F282x |
|
TI 6x |
- TMS320C67xx |
|
ver 6.2
May/2008 |
TI 3x |
- Selectable serial booting speed |
|
common |
- Max. 5 Command windows can be activated
- Max. 10 Watch windows can be
activated |
|
ver 6.1
Nov/2006 |
TI C2000 |
- TMS320F28015, TMS320F28016,
TMS320F28044 |
|
ver 6.0
Nov/2006 |
TI C2000 |
- TMS320LF240x
-
<expr>Qx format writing
- F2801, F2802 60MHz
flash
- F2809 flash |
|
common |
- MemGraph Window
- Focusing
improvement in all windows |
|
ver 5.6
Jul/2006 |
common |
- 'Save as' menu in Project |
|
TI 3x |
- supports reading bit filed type (writing is not
supported)
- new 3x USB pod |
|
ver 5.5
Apr/2006 |
TI C2000 |
- TMS320F280x |
|
common |
- Save and load function in Watch/Plot
window |
|
ver 5.0
Jan/2006 |
TI C2000 |
- TMS320F281x
- Qx format
- supports reading bit filed type (writing is not
supported) |
|
ver 4.0
Sep/2005 |
TI 3x |
- TMS320C3X USB interface
-
Multi operation (Several easyDSP operating in one PC)
- Plot windows improvement (sampling time
setting, data storage with text file)
- Multi
Watch window (Max. 4ea)
- DSP program revision (
please use easy31v4.obj/easy32v4.obj/easy33v4.obj) |
|
ver 3.3
Jun/2005 |
TI 3x |
- Supports reading 'long double' variable
(writing is not supported)
- Parallel port access
for Windows Xp (UserPort.sys)
- Automatic clock
synchronization after consecutive communication failure |
|
ver 3.2
Mar/2004 |
TI 3x |
- MSVCP60.dll for Windows 2000 |
|
ver 3.11
Oct/2003 |
TI 3x |
- Bug fix for Watch window (Bug in ver 3.1
only) |
|
ver 3.1
Aug/2003 |
TI 3x |
- Short key Alt+S = Serial booting dialog
- Short key Alt+F = Flashrom dialog |
|
ver 3.0
Apr/2003 |
TI 3x |
- Motorola MPC5xx supported (But removed
later) |
|
ver 2.8
Jan/2003 |
TI 3x |
- Internal restructuring in software
- Flashrom SST39VF040 supported |
|
ver. 2.72
Dec/2002 |
TI 3x |
- Multi window for Command window (Max. 2ea)
- Remove file extension (*.ezd) connection
- Bit mask in Memory window
-
'skip-checking when writing flashrom' in flashrom dialog |
|
ver. 2.71
May/2002 |
TI 3x |
- Revision of easy3x.obj (remove dummy
variables) |
|
ver. 2.7
Apr/2002 |
TI 3x |
- Target file selection for flashrom programming
- Flat toolbar support
-
Speed-up in Plot window
- Remove binary value
dispaly
- Range check for variable type
- Bug fix for 'long double' variable, command window
updating, infinite looping with so many variables and multi-parallel port
support. |
|
ver. 2.6
Jan/2002 |
TI 3x |
- Optional booting speed
-
Communication stops when it fails consecutively
-
Flashrom dialog box revision |
|
ver. 2.5
Nov/2001 |
TI 3x |
- Windows 2000 supported
-
Bug fix for TMS320C32 |
|
ver. 2.1
Sep/2001 |
TI 3x |
- Internal structure revision |
|
ver. 2.0
Aug/2001 |
TI 3x |
- More flashroms are supported |
|
ver. 1.11
May/2000 |
TI 3x |
- MMI function in command window |
|
ver. 1.1
Sep/2000 |
TI 3x |
- TMS320C33 supported
-
'skip' command supported in Command window |
|
ver. 1.0
Aug/1999 |
TI 3x |
- First release |